Uncoated Epoxy Floor Mesh: What It Is and How It's Applied
What "Uncoated (Raw)" Means
The "uncoated/raw" in this product's name clarifies that the mesh itself is NOT the epoxy coating — it's a reinforcement material embedded WITHIN the epoxy floor system. The epoxy resin forms the actual floor coating; the mesh simply reinforces that layer.
Application in Industrial Flooring
After an initial epoxy primer/intermediate coat is applied to the floor, the mesh is laid over it, then a second epoxy coat is poured, fully embedding the mesh. This reinforcement layer significantly increases crack resistance and service life against heavy loads, abrasion and point impact.
Frequently Asked Questions
Does every epoxy floor project need mesh?+
No — light-traffic or decorative floors may not require it. But for heavy industrial traffic, forklift use, or point-load risk, mesh reinforcement is strongly recommended.
Does the mesh show on the floor surface?+
No — when applied correctly, the mesh stays fully embedded between epoxy layers and is invisible from the surface.
